The AVR7500 has 551 peak air watt capacity and can be installed in homes up to 7,500 square feet. For installation flexibility, both the intake and exhaust ports can be connected from the left or right side. A front-mounted utility port allows easy connection of a hose directly to the power unit for local cleaning. The vacuum’s control panel has a power switch and power indicator.

The power unit's permanent fabric filter provides filtration down to .1 micron diameter. The debris bucket on the bottom of the power unit and holds up to 6 gallons of dust and dirt. Two easy-to-access swing-down latches secure the debris bucket and are used to remove the debris bucket for emptying.

The central vacuum system’s power is controlled through a low-voltage wire that connects to each wall inlet valve. When a central vacuum hose is inserted into the wall inlet valve, two sensing pins in the valve connect to the trigger ring on the hose end. Some hoses have a solid trigger ring that electrically connects the valve’s sensing pins whenever the hose is inserted into the valve, which starts the vacuum. Other hoses have a split trigger ring that’s connected to a low-voltage control switch in the hose’s handle, allowing the operator to control the vacuum unit’s power.

A foam-filled muffler is included for installation in the exhaust system piping. The muffler substantially reduces operating noise. Routing the vacuum’s exhaust through piping to outside the residence assures all remaining dust vents outside of the building.

Features

• High-efficiency, two-stage filtration for superior cleaning
• High air watt rating while maintaining low operating noise
• Power indicator
• Bagless design with debris bucket, no bag to replace
• Power unit exhausts outside the living area so dust and dirt do not recirculate
• Hose can plug directly into vacuum at utility port for local cleaning

New Item With Full Manufacturers Warranty
The M & S Systems AVR7500 is new and includes the full one year limited warranty from M & S Systems